Implementing Cisco Intrusion Prevention Systems

Exam Number: 642-533
Associated Certifications: CCSP
Duration: 90 minutes (55 – 65 Questions)
Available Languages: English
Click Here to Register: Pearson VUE
Exam Policies: Read current policies and requirements
Exam Tutorial: Review type of exam questions

Exam Description Exam Topics Recommended Training Additional Resources
Exam Description
The 642-533 IPS Implementing Cisco Intrusion Prevention Systems exam is associated with the Cisco Certified Security Professional certification. This exam tests a candidate’s knowledge of implementing the Cisco IPS product. Candidates can prepare for this exam by taking the IPS Implementing Cisco Intrusion Prevention Systems v6.0 course.

Exam Topics
The following topics are general guidelines for the content likely to be included on the Remote Access exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

Describe how Cisco IPS sensors are used to mitigate network security threats
List sensor requirements for inline operations
Explain the difference between inline and promiscuous mode sensor operations
Explain how Cisco IPS protects network devices from attacks (Describe signatures, alerts, and actions)
Explain the evasive techniques used by hackers and how Cisco IPS defeats those techniques
Describe the considerations necessary for selection, placement, and deployment of a network intrusion prevention system
Explain the Cisco IPS signature features

Install Cisco IPS sensors/modules and configure essential system parameters
Explain AIP-SSM functionalities
Use the CLI to initialize the sensor
Configure user accounts and explain the different user roles
Configure management access to the sensor appliance
Explain how allowed hosts are used and how they are configured
Describe sensor interfaces, interface pairs, VLAN-pairs, and VLAN-groups
Use the Cisco IDM to configure sensor interfaces (enable, create pairs, assign to virtual sensors)
Describe and configure software bypass
Describe sensor communications with external management and monitoring systems
Launch, navigate, and use the Cisco IDM to manage and monitor the sensor
Describe the various CLI configuration modes and sub modes and navigate between them
List the tasks for installing and configuring the IDSM-2 and AIP-SSM

Describe Cisco IPS sensor advanced system parameters
Plan the mitigation of specific network vulnerabilities and exploits
Describe sensor tuning
Explain IP fragment and TCP stream reassembly options
Explain how IP logging should be used and how it is configured
Explain the use of Event Variables
Describe signature engines and their functionality
Determine which response actions need to be configured for a given scenario
Describe the purpose of the Meta Event Generator
Explain Target Value Ratings and how they are used
Determine the need for Event Action Rules in a given scenario
Explain event Risk Ratings and how they are used

Tune Cisco IPS sensor advanced system parameters to optimize attack mitigation performance
Use the IDM to tune the sensor to work optimally in the network
Use the IDM to tune signatures to provide maximum protection for a network
Given a scenario, use the IDM to create custom signature to meet the requirements
Configure response actions for a signature
Configure the sensor to take response actions based on a risk rating
Use the Cisco IDM to create a Meta signature and disable alert production for the component signatures
Configure Event Action Filters
Configure Target Value Ratings
Configure general settings for Event Action Rules
Configure Event Variables
Use the sensor application policy enforcement feature
Configure passive OS fingerprinting (POSFP)
Explain the External Product Interface, its benefits, and specifications
Configure a virtual sensor
Configure anomaly detection
Use IDM/CLI to monitor advanced features such as POSFP and AD

Analyze Cisco IPS sensor events to determine the appropriate response to network attacks
Use the CLI and the Cisco IDM and IEV to monitor events

Upgrade and maintain Cisco IPS sensors
Move software images/upgrades and configuration files via HTTP, HTTPS, SCP, and FTP
Apply the appropriate system image to the sensor
Perform sensor password recovery
Explain sensor licensing and how to install a license
Describe service pack and signature update file names and how to install them
Recommended Training
Implementing Cisco Intrusion Prevention System (IPS) is the recommended training for this exam.

Courses listed are offered by Cisco Learning Partners, the only authorized source for Cisco IT training delivered exclusively by Certified Cisco Instructors. Check the Global Learning Partner Locator for a Cisco Learning Partner near you.

Additional Resources
A variety of Cisco Press titles may be available for this exam. These titles can be purchased through the Cisco Marketplace Bookstore, directly from Cisco Press

TestInside 642-533

Cisco 642-533

Implementing Cisco Intrusion Prevention System (IPS)

Q&A Demo

English: www.TestInside.com BIG5: www.Testinside.net GB: www.testking.name

TestInside,help you pass any IT exam!

TestInside 642-533

1. You think users on your corporate network are disguising the use of file-sharing applications by tunneling the

traffic through port 80. How can you configure your Cisco IPS Sensor to identify and stop this activity?

A. Enable all signatures in the Service HTTP engine.

B. Assign the Deny Packet Inline action to all signatures in the Service HTTP engine.

C. Enable all signatures in the Service HTTP engine. Then create an event action override that adds the Deny

Packet Inline action to events triggered by these signatures if the traffic originates from your corporate network.

D. Enable the alarm for the non-HTTP traffic signature. Then create an Event Action Override that adds the Deny

Packet Inline action to events triggered by the signature if the traffic originates from your corporate network.

E. Enable both the HTTP application policy and the alarm on non-HTTP traffic signature. Answer: E

2. A user with which user account role on a Cisco IPS Sensor can log into the native operating system shell for advanced troubleshooting purposes when directed to do so by Cisco TAC?
A. administrator

B. operator C. viewer D. service E. root
F. super

Answer: D

3. Which character must precede a variable to indicate that you are using a variable rather than a string?

A. percent sign B. dollar sign C. ampersand D. pound sign E. asterisk Answer: B

4. Which statement accurately describes Cisco IPS Sensor automatic signature and service pack updates?

A. The Cisco IPS Sensor can automatically download service pack and signature updates from Cisco.com.

TestInside 642-533

B. The Cisco IPS Sensor can download signature and service pack updates only from an FTP or HTTP server.

C. You must download service pack and signature updates from Cisco.com to a locally accessible server before they can be automatically applied to your Cisco IPS Sensor.
D. When you configure automatic updates, the Cisco IPS Sensor checks Cisco.com for updates hourly.

E. If multiple signature or service pack updates are available when the sensor checks for an update, the Cisco IPS Sensor installs the first update it detects.
Answer: C

5. Which two of the following parameters affect the risk rating of an event? (Choose two.) A. alert severity
B. global summary threshold

PassGuide offers free demo for Certification Exams You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products. Download links:http://demo.passguide.com/download

C. signature fidelity rating

D. scanner threshold

E. engine type

F. event count key

Answer: AC

6. You are using Cisco IDM. What precaution must you keep in mind when adding, editing, or deleting allowed hosts on a Cisco IPS Sensor?
A. You must not allow entire subnets to access the Cisco IPS Sensor

B. When using access lists to permit remote access, you must specify the direction of allowed communications.

C. You must not delete the IP address used for remote management. D. You can only configure the allowed hosts using the CLI.
E. You must use an inverse mask, such as 10.0.2.0 0.0.0.255, for the specified network mask for the IP address. Answer: C

7. How can you clear events from the event store?

A. You do not need to clear the event store; it is a circular log file, so once it reaches the maximum size it will be overwritten by new events.
B. You must use the CLI clear events command.

C. If you have Administrator privileges, you can do this by selecting Monitoring > Events > Reset button in Cisco

TestInside 642-533

IDM.

D. You should select File > Clear IDM Cache in Cisco IDM.

E. You cannot clear events from the event store; they must be moved off the system using the copy command. Answer: B

8. Refer to the exhibit. Based on the partial output shown, which of these statements is true?

A. The module installed in slot 1 needs to be a type 5540 module to be compatible with the ASA 5540 Adaptive

Security Appliance module type.

B. The module installed in slot 1 needs to be upgraded to the same software revision as module 0 or it will not be recognized.
C. Module 0 system services are not running.

D. There is a Cisco IPS security services module installed. Answer: D

9. Which action does the copy /erase ftp://172.26.26.1/sensor_config01 current-config command perform?

A. erases the sensor_config01 file on the FTP server and replaces it with the current configuration file from the

Cisco IPS Sensor

B. copies and saves the running configuration to the FTP server and replaces it with the source configuration file

TestInside 642-533

C. overwrites the backup configuration and applies the source configuration file to the system default

configuration

D. merges the source configuration file with the current configuration

Answer: C

10. Which of the following is a valid file name for a Cisco IPS 6.0 system image? A. IPS-K9-pkg-6.0-sys_img.sys
B. IPS-4240-K9-img-6.0-sys.sys

C. IPS-K9-cd-11-a-6.0-1-E1.img

D. IPS-4240-K9-sys-1.1-a-6.0-1-E1.img

Answer: D

11. What are the three roles of the Cisco IPS Sensor interface? (Choose three.) A. alternate TCP reset
B. blocking

C. command and control D. sensing (monitoring) E. logging
F. bypass

Answer: ACD

12. Which two are true regarding Cisco IPS Sensor licensing? (Choose two.)

A. A Cisco IPS Sensor will run normally without a license key with the most current signature updates for 90

days.

B. A license key is required to obtain signature updates.

C. A Cisco Services for IPS contract must be purchased to obtain signature updates. D. Cisco IDM requires a valid license key to operate normally.
E. The Cisco ASA 5500 Series does not require a Cisco Services for IPS contract when a valid SMARTnet contract exists.
Answer: BC

TestInside 642-533

13. With Cisco IPS 6.0, what is the maximum number of virtual sensors that can be configured on a single

platform?

A. the number depends on the amount of device memory

B. two in promiscuous mode using VLAN groups, four in inline mode supporting all interface type configurations

C. two D. four E. six
Answer: D

14. In which three of these ways can you achieve better Cisco IPS Sensor performance? (Choose three.)

A. enable all anti-evasive measures to reduce noise

B. place the Cisco IPS Sensor behind a firewall

C. always enable unidirectional capture

D. disable unneeded signatures

E. have multiple Cisco IPS Sensors in the path and configure them to detect different types of events

F. enable selective packet capture using VLAN ACL on the Cisco IPS 4200 Series Sensors

Answer: BDE

15. What is used to perform password recovery for the “cisco” admin account on a Cisco IPS 4200 Series Sensor?

A. setup mode

B. ROMMON CLI C. GRUB menu
D. recovery partition E. Cisco IDM Answer: C
Exam 642-533: Implementing Cisco Intrusion Prevention Systems (IPS)

Related Certifications: CCSP

Number of Questions: 55-65

Duration: 90 minutes

Exam Topics Include:

1. Describe how Cisco IPS sensors are used to mitigate network security threats

2. Install Cisco IPS sensors/modules and configure essential system parameters

3. Describe Cisco IPS sensor advanced system parameters

4. Tune Cisco IPS sensor advanced system parameters to optimize attack mitigation performance

5. Analyze Cisco IPS sensor events to determine the appropriate response to network attacks

6. Upgrade and maintain Cisco IPS sensors

The 642-533 IPS Implementing Cisco Intrusion Prevention Systems exam is one of the core exams associated with the Cisco Certified Security Professional (CCSP) certification. In all, you will need to pass five separate exams to become CCSP certified. This exam tests a candidate’s knowledge of implementing the Cisco IPS product
Interactive Testing Engine Included!
179 Questions
Updated : 03/13/2008
Price : $87.99 $79.99

Preparing for the 642-533 exam? Searching 642-533 Test Questions, 642-533 Practice Exam, 642-533 BrainDumps? Testking 642-533 is written to coincide with the real test by the experienced IT experts and specialists. With the complete collection of Testking Questions and Answers, Testking 642-533 is high enough to help the candidates to pass this exam easily without any other study materials and no need to attend the expensive training class.

Why choose Testking 642-533 braindumps

Quality and Value for the 642-533 Exam
100% Guarantee to Pass Your 642-533 Exam
Practice Test Questions accompanied by exhibits

Testking 642-533 Exam Features

Downloadable, Testking Interactive 642-533 Testing engines

Testking Cisco 642-533 Downloadable, Printable Exams (in PDF vce format)

Our Exam 642-533 Preparation Material Lbas provides you everything you will need to take your 642-533 exams. The 642-533 study guide Exam details Tutorials are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.

Free download?testking ccsp 642-533
Free download?pass4sure ccsp 642-533

High quality IT Certification Training Exam Questions, Study Guides and Practice Tests are in Downloadable PassGuide Testing Engine,Successful for IT Certification or Full Refund for you.www.freepassguide.co.uk

Dowload PassGuide Practice Test Questions

• Testking Actualtests cisco vce dumps
• Testking Cisco ccsp 642-545
• Testking cisco ccsp 642-504
• Testking Cisco CCSP 642-542 CSI
• Testking CCSP Dumps
• CISCO CCSP 642-524
• Cisco CCSP 642-515 SNAA Exam
• cisco 642-591 CANAC
• cisco 642-551 SND
• cisco 642-541 CSI
• cisco 642-532 IPS
• CISCO 642-522 SNPA
• cisco 642-521 CSPFA
• CISCO 642-511 CSVPN
• CISCO 642-502 SNRS