cisco 642-652 WAASFE
Visited 710 times, 1 so far today
Wide Area Application Services for Field Engineers
Exam Number: 642-652
Duration: 60 minutes (60 questions)
Available Languages: English
Click Here to Register: Pearson VUE
Exam Policies: Read current policies and requirements
Exam Tutorial: Review type of exam questions
Exam Description Exam Topics
Exam Description
The Wide Area Application Services for Field Engineers exam (WAASFE 642-652) tests the field engineer candidate’s knowledge and ability to implement a Cisco WAAS solution.
Exam Topics
The following topics are general guidelines for the content likely to be included on the Remote Access exam. However, other related topics may also appear on any specific delivery of the exam.
Implement WAAS components of an ANS solution
Determine appropriate IOS version and upgrade if necessary to meet requirements
Configure & verify networking
Configure & verify router and switch configurations
Configure & verify WAE network configurations
Configure the device modes
Configure & verify central management
Configure & verify reporting & monitoring
Configure & verify AAA and RBAC
Configure & verify device and baseline groups
Configure & verify optimization policies
Configure & verify file services acceleration
Configure & verify print services
Configure and verify load balancing of WAE services
Validate that the deployment meets customer design objectives
Troubleshoot a WAAS solution
Troubleshoot poor performance in a WAAS solution
Troubleshoot connectivity in a WAAS solution
Troubleshoot management in a WAAS solution
Troubleshoot high availability in a WAAS solution
Troubleshoot scalability in a WAAS solution
TestInside 642-652
Cisco 642-652
Wide Area Application Services for Field Engineers
Q&A Demo
English: www.TestInside.com BIG5: www.Testinside.net GB: www.testking.name
TestInside,help you pass any IT exam!
TestInside 642-652
1. After configuring a Cisco WAAS deployment using WCCPv2, you find that you can successfully ping a data
center server from a workstation in the branch office. However, when you attempt to start one of the optimized applications, the application cannot communicate with the server. What is the most likely cause?
A. There is insufficient disk space on either the edge or core WAE. B. You configured half-duplex mode on the WAE interfaces.
C. You configured autonegotiate duplex mode on the WAE interfaces. D. You deployed the WAE on the same subnet as the users or servers. Answer: D
2. Refer to the exhibit. Your customer plans to deploy the edge WAE appliances in an off-path, two-arm configuration. The WAE appliances are connected to Cisco Catalyst 6500 Series Switches and use WCCPv2 for traffic interception. The customer wants to minimize the latency added by interception. The customer also wants
to know if Layer 2 redirection, rather than GRE tunnels, will improve performance. What should you tell your customer?
A. Layer 2 redirection can be used only in in-path configurations. B. Layer 2 redirection can be used only in one-arm configurations.
C. Layer 2 redirection can be used in the customer configuration.
D. GRE tunnels provide better performance than Layer 2 redirection. Answer: C
3. When implementing Windows authentication for WAE management, what is the maximum allowable time skew
TestInside 642-652
between each WAE and the Windows domain controller?
A. 1 second
B. 5 seconds
C. 120 seconds D. 300 seconds Answer: D
4. Your customer plans to implement Cisco WAAS using four WAE appliances in a load-balanced configuration. Which feature must be supported on the switches to which the WAE appliances are attached?
A. redirect exclusion B. Layer 2 redirection C. WCCPv2
D. WCCPv2 or PBR Answer: C
5. Your customer has deployed Cisco WAAS using ACE for traffic interception. The customer reports that traffic
is not being optimized. Which command would you use to troubleshoot network interception? A. WAE-CORE# show wccp routers
B. WAE-CORE# show ip access-lists C. ACE/Admin# show wccp routers D. ACE/Admin# show rserver detail E. router# show wccp services Answer: D
6. Refer to the exhibit. What are two possible reasons the CORE1 WAE might be displayed as “Offline”? (Choose two.)
A. The WAE is powered off.
B. The HTTPS service is disabled.
C. The Central Manager service is disabled.
TestInside 642-652
D. The WAE is configured in the same VLAN as the server nodes.
Answer: AC
7. Your customer reports that traffic has never been received by the remote device after deploying Cisco WAAS
using WCCPv2 in an off-path configuration. Which two parameters should you verify? (Choose two.)
A. IP SLAs
B. WAE subnet
C. router IP address
D. routing configuration
E. service group redirection
Answer: BE
8. Refer to the exhibit. This partial listing shows output from the show tfo connection summary command. Given this output, which statement is correct?
A. The local WAE policy was configured for LZ compression only; the remote WAE policy was configured for full optimization.
B. The local WAE policy was configured for LZ compression and TFO optimization; the remote WAE policy was
TestInside 642-652
configured for LZ compression only.
C. Both the local and remote WAE policies were configured for LZ compression only.
PassGuide offers free demo for Certification Exams You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products. Download links:http://demo.passguide.com/downloadD. Both the local and remote WAE policies were configured for LZ compression and TFO optimization, but only
LZ compression was applied. Answer: A
9. You have configured a Central Manager WAE cluster for your customer. After a technician accidentally unplugs
the power cord from the primary Central Manager WAE, the network administrator calls you to complain that the standby Central Manager WAE did not automatically assume the primary role. What should you tell this administrator?
A. You must manually initiate failover and fallback processes on the WAE.
B. You should verify that the datafeed.pollrate setting is configured properly.
C. You must manually copy the Central Manager database to the standby Central Manager WAE.
D. You should make sure the two Central Manager WAE appliances are on the same subnet. Answer: A
10. When must WCCPv2 redirect exclusion be configured on the routers? A. when redirect in is used on any interface
B. when redirect in is used on the LAN interface only C. when redirect in is used on the WAN interface only D. when redirect out is used on any interface
E. when redirect out is used on the LAN interface only F. when redirect out is used on the WAN interface only Answer: D
11. How many IP addresses are required for an in-line card in a redundant, serially clustered configuration?
A. none B. one C. two D. four
Answer: A
TestInside 642-652
12. Which two symptoms would you expect to observe in a TCP trace if a Cisco WAE that was optimizing
connections fails? (Choose two.)
A. The receiving node receives TCP segments with invalid sequence numbers and resets the connection.
B. The secondary WAE takes over the connection and the receiving node sees nothing.
C. The receiving node continues normally because it has a session to the originating node. D. All optimized TCP connections handled by that WAE are reset.
E. All optimized TCP connections are taken over by the receiving node. Answer: AD
13. How can you verify that the WAE has joined a Microsoft Windows domain correctly? A. Execute the show windows-domain command on the WAE.
B. Click the Show Authentication Status button in Central Manager. C. Use the Windows nbtstat command.
D. Use the Windows netstat command. Answer: B
14. Refer to the exhibit. The exhibit shows the result of executing the show wccp services configuration. What conclusion can you draw from this result?
A. The configuration is valid.
B. The configuration is valid for an in-line deployment only.
C. The configuration is valid if a redirect exclude directive has been configured correctly. D. The configuration is not valid.
Answer: D
15. In a Cisco WAAS deployment, what should you check first if your customer is reporting poor performance across all optimized applications?
A. Verify that full duplex is configured on all interfaces.
B. Verify that only one Central Manager WAE is set to active.
TestInside 642-652
C. Verify that PBR has a route map for each direction of traffic flow.
D. Verify that WCCP is configured with one service group in the path of each direction of traffic flow. Answer: A
16. Your customer is using firewalls. What must be permitted to pass through firewalls in order to allow WAE
autodiscovery?
A. TCP SYN-ACK with data
B. TCPoptions
C. TCP port 139
D. TCP port 445
Answer: B
17. Your customer has configured each Cisco WAE to belong to multiple device groups for monitoring purposes. However, the customer wants to ensure that the policies are applied to the device from one specific device group. What should you do?
A. You should configure an explicit policy device group.
B. You should configure the other device groups as monitoring-only. C. You should rejoin the WAE to the desired device group.
D. You must remove the WAE from all other device groups. Answer: A
18. How do you access the WAE Central Manager GUI? A. http://(ip_addr_of_WAE)
B. https://(ip_addr_of_WAE):443
C. https://(ip_addr_of_WAE):8080
D. https://(ip_addr_of_WAE):8443
Answer: D
19. How many baseline device groups can be configured for the acceleration feature set? A. one
B. two
TestInside 642-652
C. three
D. as many as needed
Answer: A
20. TCP options are added to which TCP connection establishment messages during Cisco WAAS autodiscovery?
A. ACK and SYN-ACK B. SYN and ACK
C. SYN and SYN-ACK D. SYN and RST Answer: C
Interactive Testing Engine Included!
50 Questions
Updated : 03/06/2008
Price : $87.99 $79.99
Free download?testking 642-652 WAASFE
Free download?pass4sure 642-652 WAASFE
Dowload PassGuide Practice Test Questions
7 Comments on “cisco 642-652 WAASFE”